Multifunction Steering Wheel Buttons and Knobs for BMW X4 F26 (2014 to 2018)
Direct OEM fit — no cutting
Free US shipping
1-year warranty
30-day easy returns
Upgrade the look and functionality of your BMW X4 with our premium multifunction steering wheel buttons and rotary knobs, precisely designed for the BMW X4 F26 (2014–2018). Whether you're replacing worn-out controls or refreshing your interior with OEM-style components, this kit provides factory-grade integration and a refined, responsive feel.
Looking to upgrade other interior components of your car? Visit our BMW interior aftermarket parts section for more options.
- 2014 BMW X4 F26
- 2015 BMW X4 F26
- 2016 BMW X4 F26
- 2017 BMW X4 F26
- 2018 BMW X4 F26
Two configurations are available depending on your steering wheel type:
Standard Steering Wheel
M-Sport Steering Wheel
Make sure to choose the correct version before purchasing.
Direct replacements for the factory media-control knobs. These restore precise, smooth adjustments and improve everyday usability.
Replacement trims that surround the rotary controls.
Available exclusively for M-Sport steering wheels.
Inspired by BMW M models, these replica buttons offer a sportier visual touch and enhanced steering wheel aesthetics.
Only compatible with M-Sport steering wheels.
What you'll need: T20 Torx screwdriver, thin Torx-style tool (for the airbag springs), small tray or cup for screws.
1. Safety first: Disconnect your battery before touching anything on the steering wheel. Wait at least 1 minute after disconnecting to let the airbag system fully discharge.
2. Find the airbag access holes
On the back of the steering wheel, look for the access holes at roughly the 4:40 position (these are not the holes sitting directly behind the buttons, we will get to them later). Insert your thin tool and angle it until you feel the spring.
Once you feel the spring, push it in. The airbag releases on that side. Do the same on the other side and the airbag pops right out.
3. Unplug and set the airbag aside
Pull the connector clip to unplug the airbag from its harness. Set it face-up on a flat, stable surface. Never lay an airbag face-down or leave it somewhere it could fall.
4. Remove the upper trim panel
Use your T20 to remove the 2 screws on the upper trim panel surrounding the airbag cover (one left and one right). Watch out for the cable running through that area. There's also a screw on the back of the wheel — get that one out too before pulling the trim off.
5. Unscrew the switch panel
Turn the wheel slightly to get better access to the steering wheel switch panel screw from the back (one on each side). Remove it with the T20 and drop it in your tray.
6. Take apart the button panel
Pull the panel out and flip it over. You'll see three screws — remove all three. The button assembly will fall right out.
Then, using a flat screwdriver, push the buttons from behind until they unclip.
7. Reassemble in reverse order
Screw the button panel back together (3 screws):
Reinstall the buttons switch panel (back screws):
Then the upper trim (2 front screws and 1 back screw):
Plug the airbag back in, align it with the pointy end facing up, and press it in until it clicks.
8. Reconnect and test
Plug the battery back in. You may get a prompt to reset the time on your iDrive — that's normal. Turn the wheel all the way left then all the way right to reset the system, then test your steering wheel buttons to confirm everything works. iDrive path: My Vehicle → iDrive Settings → Date & Time → Automatic Time Settings.
Installation is designed to be quick and accessible, with no software coding required:
1. Disconnect the battery (critical safety step).
2. Remove the airbag module using the rear access points on the steering wheel.
3. Replace the buttons, knobs, or trims using the original mounting locations.
4. Reinstall the airbag and reconnect the battery.
All components are plug-and-play, fitting directly into the OEM housings.
Before ordering, confirm whether your BMW X4 F26 is equipped with a standard or M-Sport steering wheel, as parts differ between the two versions.
Replace your factory grille with a sportier M-style look. Precision-molded ABS for a perfect snap-in fit on the 3 Series G20 and M3 G80 (2019–2024). UV-resistant gloss finish that won't fade.
Replace your factory grille with a sportier M-style look. Precision-molded ABS for a perfect snap-in fit on the 3 Series G20 and M3 G80 (2019–2024). UV-resistant gloss finish that won't fade.
