Multifunction Steering Wheel Buttons and Knobs for BMW 4 Series F32/M4 F82 (2013 to 2020)
Direct OEM fit — no cutting
Free US shipping
1-year warranty
30-day easy returns
Refresh your BMW’s interior and restore full steering-wheel functionality with our OEM-style multifunction buttons and rotary knobs, engineered specifically for the BMW 4 Series F32 and BMW M4 F82 (2013–2020). Whether your original controls are worn, unresponsive, or you simply want a cleaner, updated appearance, this kit offers factory-precise integration and premium tactile feel.
Each piece matches the original BMW look, ensuring smooth operation, accurate response, and a refined finish that elevates your cabin.
Looking to upgrade the interior of your 4 Series? Also visit the BMW section of our aftermarket parts shop.
Fully compatible with the following models:
BMW 4 Series F32 – 2013 to 2020
BMW M4 F82 – 2013 to 2020
Two variants are available based on your steering wheel type:
Standard Steering Wheel
M-Sport Steering Wheel
Please ensure you select the correct version before ordering.
Direct replacements for the original media-control knobs on your steering wheel. These restore smooth adjustment and enhance day-to-day driving comfort.
Replacement trims surrounding the control knobs.
Available only for vehicles equipped with M-Sport steering wheels.
Replica sport buttons inspired by BMW’s M Competition models, providing a dynamic, performance-oriented appearance.
Exclusively for M-Sport steering wheels.
What you'll need: T20 Torx screwdriver, thin Torx-style tool (for the airbag springs), small tray or cup for screws.
1. Safety first: Disconnect your battery before touching anything on the steering wheel. Wait at least 1 minute after disconnecting to let the airbag system fully discharge.
2. Find the airbag access holes
On the back of the steering wheel, look for the access holes at roughly the 4:40 position (these are not the holes sitting directly behind the buttons, we will get to them later). Insert your thin tool and angle it until you feel the spring.
Once you feel the spring, push it in. The airbag releases on that side. Do the same on the other side and the airbag pops right out.
3. Unplug and set the airbag aside
Pull the connector clip to unplug the airbag from its harness. Set it face-up on a flat, stable surface. Never lay an airbag face-down or leave it somewhere it could fall.
4. Remove the upper trim panel
Use your T20 to remove the 2 screws on the upper trim panel surrounding the airbag cover (one left and one right). Watch out for the cable running through that area. There's also a screw on the back of the wheel — get that one out too before pulling the trim off.
5. Unscrew the switch panel
Turn the wheel slightly to get better access to the steering wheel switch panel screw from the back (one on each side). Remove it with the T20 and drop it in your tray.
6. Take apart the button panel
Pull the panel out and flip it over. You'll see three screws — remove all three. The button assembly will fall right out.
Then, using a flat screwdriver, push the buttons from behind until they unclip.
7. Reassemble in reverse order
Screw the button panel back together (3 screws):
Reinstall the buttons switch panel (back screws):
Then the upper trim (2 front screws and 1 back screw):
Plug the airbag back in, align it with the pointy end facing up, and press it in until it clicks.
8. Reconnect and test
Plug the battery back in. You may get a prompt to reset the time on your iDrive — that's normal. Turn the wheel all the way left then all the way right to reset the system, then test your steering wheel buttons to confirm everything works. iDrive path: My Vehicle → iDrive Settings → Date & Time → Automatic Time Settings.
Before ordering, double-check whether your vehicle is equipped with a Standard or M-Sport steering wheel, as the components differ by version.
Replace your factory grille with a sportier M-style look. Precision-molded ABS for a perfect snap-in fit on the 3 Series G20 and M3 G80 (2019–2024). UV-resistant gloss finish that won't fade.
Replace your factory grille with a sportier M-style look. Precision-molded ABS for a perfect snap-in fit on the 3 Series G20 and M3 G80 (2019–2024). UV-resistant gloss finish that won't fade.
